Drill Bit Size Chart
Tools
Data 2026.07.13-audit.1
Checking connection

UNF · cutting tap · nominal dimensions

3/4-16 UNF
tap drill size.

For 3/4-16 UNF, the reference drill is 11/16: 0.6875 in (17.462 mm).

The reference value is kept separate from the 70% and 75% calculated targets. Actual fit still depends on thread class, tool, material, runout, and the hole you really make.

Reference drill Provisional
Calibrated relative diameter · 1 in reference
Provisional reference — row-level source not closed
11/16
0.6875 in · 17.462 mm
Calculates to77.0%theoretical full thread
70% target0.6932 in17.606 mm
75% target0.6891 in17.503 mm
Where this drill sits from 0 to 1 inch
11/16 · 17.462 mm on a zero to 25.4 millimetre scale. Neighbor marks: 43/64, 45/64.
0 25.4 mm
Check My Bit Box Print chart

Detail A · basic 60° profile

What the percentage describes.

“Theoretical full thread %” is radial thread height from nominal geometry. It is not axial engagement length and not a fit-class acceptance measurement.

Axial section of 3/4-16 UNF Schematic 60-degree internal and external thread profiles with the common chart drill line and basic internal minor-diameter reference. Differences are exaggerated for explanation. BASIC INTERNAL MINOR-DIAMETER REFERENCE · 83.3% CHART DRILL Ø 0.6875 IN / 17.462 MM PITCH P = 1.587 MM 60° INTERNAL THREAD / WORKPIECE MATING EXTERNAL THREAD — BASIC PROFILE SCHEMATIC · PROFILE DIFFERENCE EXAGGERATED 77.0% THEORETICAL FULL THREAD
The 83.3% line is a basic-profile reference—not a universal interference switch. Actual fit depends on the internal and external thread profiles, class, tolerances, tap, and real hole.

Real drill alternatives

Neighboring sizes.

These are diameter neighbors, not silent recommendations. A positive delta makes a larger hole and a lower nominal theoretical percentage; a negative delta does the opposite.

Nearest nominal bits to 11/16
BitSystemDiameterDeltaCalculated full thread
43/64 fractional 43/64 in / 17.066 mm -0.0156 in 96.2%
45/64 fractional 45/64 in / 17.859 mm +0.0156 in 57.7%
21/32 fractional 21/32 in / 16.669 mm -0.0312 in 115.5%
23/32 fractional 23/32 in / 18.256 mm +0.0312 in 38.5%
41/64 fractional 41/64 in / 16.272 mm -0.0469 in 134.7%
47/64 fractional 47/64 in / 18.653 mm +0.0469 in 19.2%
Optional spatial explanation SCHEMATIC · NOT TO SCALE

Why 3D is useful here

A thread is a helix, not a row of triangles.

Load a draggable cutaway to see the continuous internal thread. Exact diameter and profile comparisons remain in the 2D drawing above.

Evidence and limits

Why this row says provisional.

Tap-drill row: A familiar chart or D-minus-pitch value that was not closed against a single row in the selected OSG/Guhring public tables. Kept visible for audit, never labeled normative or manufacturer-published.

Open Drill Bit Size Chart source

60° geometry: Public primary reference for Unified and metric 60-degree thread geometry. The percentage-thread equation is a theoretical basic-profile calculation, not a fit or torque guarantee.

Open National Institute of Standards and Technology geometry source

The repository also records 11 source records and a dataset version on every page.

Nearby UNF threads

5/8-18 UNF7/8-14 UNF9/16-18 UNF1/2-20 UNF