Drill Bit Size Chart
Tools
Data 2026.07.13-audit.1
Checking connection

UNC · cutting tap · nominal dimensions

3/4-10 UNC
tap drill size.

For 3/4-10 UNC, the reference drill is 21/32: 0.6563 in (16.669 mm).

The reference value is kept separate from the 70% and 75% calculated targets. Actual fit still depends on thread class, tool, material, runout, and the hole you really make.

Reference drill Provisional
Calibrated relative diameter · 1 in reference
Provisional reference — row-level source not closed
21/32
0.6563 in · 16.669 mm
Calculates to72.2%theoretical full thread
70% target0.6591 in16.740 mm
75% target0.6526 in16.575 mm
Where this drill sits from 0 to 1 inch
21/32 · 16.669 mm on a zero to 25.4 millimetre scale. Neighbor marks: 41/64, 43/64.
0 25.4 mm
Check My Bit Box Print chart

Detail A · basic 60° profile

What the percentage describes.

“Theoretical full thread %” is radial thread height from nominal geometry. It is not axial engagement length and not a fit-class acceptance measurement.

Axial section of 3/4-10 UNC Schematic 60-degree internal and external thread profiles with the common chart drill line and basic internal minor-diameter reference. Differences are exaggerated for explanation. BASIC INTERNAL MINOR-DIAMETER REFERENCE · 83.3% CHART DRILL Ø 0.6563 IN / 16.669 MM PITCH P = 2.540 MM 60° INTERNAL THREAD / WORKPIECE MATING EXTERNAL THREAD — BASIC PROFILE SCHEMATIC · PROFILE DIFFERENCE EXAGGERATED 72.2% THEORETICAL FULL THREAD
The 83.3% line is a basic-profile reference—not a universal interference switch. Actual fit depends on the internal and external thread profiles, class, tolerances, tap, and real hole.

Real drill alternatives

Neighboring sizes.

These are diameter neighbors, not silent recommendations. A positive delta makes a larger hole and a lower nominal theoretical percentage; a negative delta does the opposite.

Nearest nominal bits to 21/32
BitSystemDiameterDeltaCalculated full thread
41/64 fractional 41/64 in / 16.272 mm -0.0156 in 84.2%
43/64 fractional 43/64 in / 17.066 mm +0.0156 in 60.1%
5/8 fractional 5/8 in / 15.875 mm -0.0312 in 96.2%
11/16 fractional 11/16 in / 17.462 mm +0.0312 in 48.1%
39/64 fractional 39/64 in / 15.478 mm -0.0469 in 108.3%
45/64 fractional 45/64 in / 17.859 mm +0.0469 in 36.1%
Optional spatial explanation SCHEMATIC · NOT TO SCALE

Why 3D is useful here

A thread is a helix, not a row of triangles.

Load a draggable cutaway to see the continuous internal thread. Exact diameter and profile comparisons remain in the 2D drawing above.

Evidence and limits

Why this row says provisional.

Tap-drill row: A familiar chart or D-minus-pitch value that was not closed against a single row in the selected OSG/Guhring public tables. Kept visible for audit, never labeled normative or manufacturer-published.

Open Drill Bit Size Chart source

60° geometry: Public primary reference for Unified and metric 60-degree thread geometry. The percentage-thread equation is a theoretical basic-profile calculation, not a fit or torque guarantee.

Open National Institute of Standards and Technology geometry source

The repository also records 11 source records and a dataset version on every page.

Nearby UNC threads

5/8-11 UNC7/8-9 UNC9/16-12 UNC1/2-13 UNC