number drill · nominal diameter

#35
drill bit size.

A #35 bit measures 0.1100 in across (2.794 mm).

The inch decimal is the published nominal designation; millimetres are a conversion.

Diameter conversion cross-checked

Calibrated relative diameter · 1 in reference

#35 · number

0.1100 in

2.794 mm

Designation#35number

Inch decimal0.1100nominal

Metric conversion2.794millimetres

Where this size sits from 0 to 1 inch

#35 · 2.794 mm on a zero to 25.4 millimetre scale. Neighbor marks: 2.8 mm, 7/64.

0 25.4 mm

Show calibrated outline Open in Finder

Measured neighbors

What sits beside #35.

“Nearest” means nominal diameter only. It does not make a neighboring size acceptable for a tolerance, tapping, reaming, or fastener application.

Other naming systemsABSOLUTE DIAMETER DELTA

2.8 mmmetric 0.1102 inΔ +0.006 mm 7/64fractional 0.1094 inΔ -0.016 mm 2.7 mmmetric 0.1063 inΔ -0.094 mm 2.9 mmmetric 0.1142 inΔ +0.106 mm

Same seriesNEAREST NOMINAL ROWS

#34number 2.819 mmΔ +0.025 mm #33number 2.870 mmΔ +0.076 mm

Source record

ASME.

The standard text is paywalled. Number and letter series are cross-checked against public manufacturer charts; exact standard edition/page verification remains a release gate.

Open source record

#35drill bit size.

What sits beside #35.

ASME.

#35
drill bit size.